Fire Extinguishers
Select a product to view more information.
Carbon Dioxide Fire Extinguisher
| |
General
"Protec" Carbon Dioxide (CO2) fire extinguisher is manufactured in conformity to BS EN3 : Parts 1 - 6 : 1996 and SS232 : Parts 1 - 6 : 1999. It is suitable to be used for fighting Class “B” (flammable liquid) and Class “C” (electrical) fire.
The carbon dioxide gas extinguishes the fire by directing the jet of CO2 gas to the base of the fire, thus covering the air around the fire and reduce the oxygen level at the fire point. This will prevent the fire from spreading further and reigniting again.
CO2 fire extinguishers are extensively used in food industry, electronic factories, ships, electrical plants or rooms, offices, etc., It is a clean extinguishant agent and do not leave any residue after it has been discharged.
Construction
The cylinder body is seamless and extruded from high grade carbon manganese steel. All CO2 cylinders are pressure tested to 250 bars. The internal areas are sand blasted to rid it of rust and the external are spray epoxy/polyester powder coated and oven baked at 180 degree Celsius.
The 2.0Kg capacity is fitted with a swivel discharge built-in nozzle horn and the 5.0Kg capacity and above are fitted with a discharge high pressure hose and horn.
The fire extinguisher valve is a high pressure type made of brass material, finished in nickel chrome and incorporates a safety disc inside.
Safety
CO2 can burn the skin if the extinguisher is held incorrectly. The gas can also cause suffocation if it has been discharged in an enclosed room. If this happens, it is advisable to seek medical treatment immediately.
It is recommended that all personnel should be trained in the operation of the portable fire extinguisher for their own safety and to maximise the effectiveness of the extinguishant.
Approval
PSB Listed under Class 1A (Singapore).
 |
|
|
Dry Chemical Fire Extinguisher
| |
General
"Protec" range of ABC Dry Chemical Powder, multi-purpose fire extinguishers are truly versatile for extinguishing Class "A" (carbonaceous material) fire achieved by sealing the burning embers. It is also used on Class "B" (flammable liquid) and Class "C" (electrical) fires. It is not a requirement under BS EN3 standard specification to test Class "C" fire.
The stored pressure fire extinguishers are available in a wide range of capacities. They are manufactured under ISO 9001 : 2000 Quality System conforming to EN3:1996 and SS232:1999 Standard Specifications.
The smaller capacities, eg., 1.0Kg and 2.0Kg come with direct discharge nozzles, whilst the medium to large capacities, eg., 4.0Kg, 6.0Kg and 9.0Kg come with a discharge hose and horn fixed at the outlet port of the fire extinguisher valve.
The fire extinguishers are suitable for use in factories, warehouses, commercial building offices, shopping centres, schools, hospitals, ships, small boats, vehicles, residential homes, etc.
Safety
It is recommended that all personnel should be trained in the operation of the portable fire extinguisher for their own safety and to maximise the effectiveness of the extinguishing agent.
Approval
PSB Listed under Class 1A (Singapore).
 |
|
|
 |
|
|
